home *** CD-ROM | disk | FTP | other *** search
- Path: news.mindspring.com!usenet
- From: jjerrim@comminfo.com (John Jerrim)
- Newsgroups: comp.dcom.modems
- Subject: Re: MSD says COM2 02E8H
- Date: Fri, 01 Mar 1996 13:56:29 GMT
- Organization: CTS, Inc.
- Message-ID: <3136fed0.66534497@news.atl.mindspring.com>
- References: <4h4ood$opt@mark.ucdavis.edu>
- Reply-To: jjerrim@comminfo.com
- NNTP-Posting-Host: jjerrim.mindspring.com
- X-Newsreader: Forte Agent .99c/16.141
-
- rousseau@wheel.ucdavis.edu (Robert Rousseau) wrote:
-
- :Windows 3.1 on a 486
- :MSD: COM1 = 03F8H, COM2 = 02E8H
- :I don't think these addresses ar normal.
- :
- :mouse uses COM1, USR 14.4 internal Sport uses COM2 IRQ3
- :Winfax Pro faxes OK
- :Windows Terminal dials OK
- :but DOS> echo ATDT > COM2 says error writing to COM2
- :and Reachout and Closeup don't work
- :before running Winfax, Reachout diagnostics can find modem
- :after using Winfax, Reachout diagnostics believes : "no working modem"
- :(Winfax autoanswere is *off*)
- :
- :It used to work OK but not since upgrading Winfax Pro and installing Reachout
- :
- :Any suggestions on what to check or what utilities to use to check it
- :will be greatly appreciated.
- :
- :Thanks.
-
- Drop by our home page at http://comminfo.com and get a copy of
- PortInfo - it's designed specifially to sort out serial port problems
- like this. You may want to review our comparison of PortInfo with MSD
- as well - it will explain why MSD is mis-reporting your port
- addresses.
- John Jerrim
- Computer Telecommunication Systems, Inc.
- Diagnostic & Installation Products for Modems & Serial Ports
-
- World Wide Web: http://www.comminfo.com
- FTP: ftp://ftp.comminfo.com/users/www00402
- E-Mail: jjerrim@comminfo.com
- Voice: 1-770-263-8623
- FAX: 1-770-263-0124
-
-